制毡纱 Roving for chopped strand mat

制毡纱 Roving for chopped strand mat

特征：
硅烷型浸润剂处理
纤维线密度稳定，tex偏差小
低的静电积累，毛丝少
纤维硬挺度适中，具有优良的短切性，适合于动力分散
与饱和聚酯树脂有良好的相容性，具有高的透光度
可赋予复合材料高的物理化学性能
Product features：
Dealing with silane oftreating compound 
filament density steady and have excellent endurable of abrading .low fuzz
easy to chopping and good strands distribution.
soluble with UP resin, panel transparent light well.
endued good physical and chemical properties for final composite products

应用：
由“E”玻璃制成的连续纤维合股粗纱，适合生产制毡工艺
应用于增强不饱和聚酯树脂
Application
Applying for transparent panel process
Applying for reinforced UP resin.
包装：合股无捻粗纱，每个纱团用聚乙烯塑料袋进行包装，然后放入托盘或纸箱，每个托盘可码放48个或64个纱团，每个纱团重量17-20kg。可根据用户要求增加纱团重量。托盘堆高不大于2层，纸箱堆高不大于5层。
订货时请注明: ◎产品代号 ◎粗纱Tex值 ◎订货总重量 ◎包装方式 ◎如有特殊要求请注明
Packing    
Each direct roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet. Each pallet can stack 48 or 64 rolls .each roll weight is 15-18kg. It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers. 
please remark followings in purchasing order: ◎ product code ◎roving TEX  ◎quantity ◎packaging requirement  ◎special needs can meet according to customer requirements.
贮存：产品应堆放于干燥凉爽处，如若不用，请勿打开包装物或扎紧包装口，以免受潮。
Storage
Product shall be placed under dryness condition and shall no be open the covering membrane until applying. 
技术参数：Teachnical index
产品代号
Product 
code	特克斯TEX	单丝直径
Filament 
diameter（μm）	适用树脂
Compatible 
resin	适用工艺
Applying
process	烧失量
LOI%
ETR	2400	11-13	UP/EP	continuum process 	0.3-0.7
CTR	2400	11-13	UP/EP	continuum process	0.3-0.7
石膏纱：